The MCBalance* is the highest standard in gravimetric dosing. It proves its value on a daily basis in all branches, under all circumstances in injection molding, blow molding and extrusion.
The dosing cylinder and patented weighing technology ensure extremely accurate dosing, even when low dosage rates are required. In this way, high savings on expensive additives can be achieved.
The continuous loss-in-weight measuring feature and automatic motor speed adjustment are key to a stable production process. This guarantees high quality end products and fewer rejects.
* also for clean room and high temperature applications
The MCTwin uses Movacolor’s gravimetric dosing technology. This means continuous loss-in-weight measurement and automatic adjustment. The functionality of dosing regrind in combination with the additive makes the MCTwin a sustainable solution for your production process.
One dosing unit of the MCTwin functions as the master unit and doses regrind, while the second operates in conjunction with the master unit and doses the additive. In practice this means that the more regrind is available, the less colorant is added. This enables you to avoid over consumption of additives and to reuse the maximum of regrind. The process is fully automatic, so you always dose the maximum percentage of available regrind. The quality remains constant, production run after production run, 24/7.
Check out this great video
By using these two blending and dosing technologies in one machine, you are able to control the main materials in any given ratio and at the same time dose additives at low percentages with unequaled accuracy.
The MCHybrid 30* is a unique dosing concept that combines two technologies into one system: batch blending and in-line dosing.
The main materials or regrinds are mixed in an extreme compact gravimetric batch blender. Because the system only blends the main materials, the blending speed is high and therefore the batch blender remains small.
The additives are dosed gravimetrically in-line, directly on the throat of the injection molding machine or extruder.
By using these two blending and dosing technologies in one machine, you are able to control the main materials in any given ratio and at the same time dose additives at low percentages with unequalled accuracy.
* patent pending
If requested, the blender itself can also be used without the in-line blending units. In that case the capacity and the accuracy will reduce compared to the MCHybrid concept.
The MCHybrid 30 is also available in a specially developped regrind version: the MCHybrid 30R-series. Interested in this special regrind version of the MCHybrid 30? Inform with our dosing specialists.